- SHOP
- >
- Grow Lighting
- >
- CMH Grow Lights
- >
- SunPlix 315W CMH Grow Light Fixture
SunPlix 315W CMH Grow Light Fixture
315W CMH Grow Light Fixture
Introduction:
SunPlix 315W CMH grow lighting fixture utilizes Fuzzy Logic 4th Generation ballast technology. The patent technology keeps lumen maintenance rate higher than 95% at 30,000 hours and maintains the initial spectrum so you can use your light much longer than traditional HPS grow light.
Besides the long lamp lifetime, the fixture gives off full spectrum light which is similar to sunlight.
The light generates much less heat because more power is converted to useful light, not heat. Comparing to HPS grow light, it saves about half power.
Spectral Power Distribution:
Compatible Lamps:
Characteristics of CMH-315F Fixture
NameDescriptionInput power 349WOutput power (Max)315WOperating voltage120V/208V/240V/277VAmperage drawn2.91A/120V, 1.68A/208V, 1.45A/240V, 1.26A/277VSafe voltage94V~276VInput frequency50/60HzPower factor>0.99THD<6%Efficiency>91%Communication interface(0-10V optional)Lamp wire length (Max)>100 feet (16 gauge lamp wire)Power/light output315WProtection functionsProtection of short-circuit, open-circuit, over-voltage, under-voltage, over-current, hot lamp startup, lightning, over heat, and lamp failure with lamp life warning.Size L: 21”, W: 14”, H: 6”Net weight7.6 lbWarranty3 yearsCertificatesUL, CUL, FCCReflectorHorizontal. Can be attached to ballast or be installed remotely. Size: L: 17”, W: 14”, H: 6”.
Input:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Output:
Black wire: AC power Line wire
White wire: AC power Neutral wire
Green wire: Ground wire
Cautions:
- CMH-315W digital ballast should work on operating voltage with corresponding bulbs. High power bulb can be used to dim to low power output, but not the reverse.
- The work environment temperature for the ballast ranges from -40 F°/-40 C° to +122 F°/+50 C°, the maximum work temperature of its shell can be +158 F°/+70 C°.
- The ballast should avoid working under high temperature environment which will affect its service life.
- Combustible substances and corrosive gas should not be placed in the work environment of the ballast.
- If a ballast is damaged, do not try to fix it. Users should exchange it with suppliers or send it to the factory for maintenance.